General Calcium Chloride FAQs
First, determine the amount of dry calcium chloride to mix with water using our helpful Making Solutions Calculator tool.
Always start with cool water and add the solid calcium chloride slowly to the water while continuously mixing. Significant heat is released when dissolving solid calcium chloride, and a temperature increase will occur. For example, when dissolving DOWFLAKE® Xtra 83-87% Calcium Chloride Flakes while making up a 30% solution, the temperature can be expected to increase almost 84°F.
If solids are allowed to sit motionless while in contact with water, a hard cake will form that will be slow to dissolve.
Please consult our Diluting Solutions Calculator, which covers three different options:
- Diluting with water
- Diluting with a lower concentration calcium chloride solution
- Diluting with both water and a lower concentration calcium chloride solution
The pH reading for an undiluted sample of 35% solution is approximately 9. OxyChem calcium chloride products are alkaline due to the presence of a slight calcium hydroxide impurity.
Accurate and consistent pH measurement in concentrated salt solutions can be challenging. Results vary depending on the pH probe used and the degree of sample dilution.
No, OxyChem does not have a calcium chloride dihydrate product. DOWFLAKE® Xtra is the closest to a dihydrate concentration.
Calcium chloride dihydrate has two water molecules for every one calcium chloride molecule, giving an overall calcium chloride concentration of 75.5%. OxyChem’s DOWFLAKE® Xtra product contains a minimum of 83% calcium chloride, making it more concentrated than the calcium chloride dihydrate flake on the market.
If lightly caked, the product may be broken up by knocking the closed package against a hard surface, like breaking up a bag of ice. If the caked product is too hard to break apart, the product is, unfortunately, unusable and should be disposed of according to guidance on the product label. DO NOT TRY FORCEFUL HAMMERING TO BREAK THE PRODUCT APART. FLYING PRODUCT PIECES MAY BE AN EYE HAZARD.
View sales specifications using the product links below.
Anhydrous 94-97% Mini Pellets
BRINERS CHOICE® Anhydrous Calcium Chloride Pellets
COMBOTHERM® Blended Deicer
Calcium Chloride 83-87% Granulated
DOWFLAKE® Xtra 83-87% Calcium Chloride Flakes
Food Grade Anhydrous 94-97% Calcium Chloride Pellets
LIQUIDOW® Technical Grade Calcium Chloride Solution
LIQUIDOW® Food Grade Calcium Chloride Solution
PELADOW® DG Calcium Chloride Briquettes
PELADOW® Premier Snow & Ice Melter
Store product in a dry area, and tightly reseal after each use. To maintain product quality while in storage, solid calcium chloride must be protected from moisture. If the product is on a pallet covered by an intact plastic shroud, it can be stored outdoors on a well-drained surface. If the shroud is torn, pierced, or removed, the palletized product should be stored indoors or under a waterproof covering.
For additional information, see our Calcium Chloride Handbook.
The preferred material of construction for large liquid storage tanks is carbon steel with an epoxy-based interior coating and a durable, high-quality coating on the exterior. Non-metallic materials, such as fiberglass or plastic, work well for smaller tanks storing product at ambient temperature; however, these materials are not as durable as carbon steel, and they lose strength at high temperature.
Common stainless steels are not recommended for liquid calcium chloride storage as they are subject to chloride stress corrosion cracking, even at temperatures as low as 100°F (38°C).
For additional information, see our Calcium Chloride Handbook.
When properly stored to protect from moisture contact, the expected shelf life for solid calcium chloride products is 36 months. Calcium chloride does not degrade or deteriorate. However, the shelf life is limited based on the potential for moisture intrusion into the product, which may cause product clumping. Solid calcium chloride absorbs moisture from the air (i.e., is hygroscopic), even to the point of converting to liquid brine (i.e., is deliquescent).
OxyChem issues Certificates of Analysis only for the following specialty products:
Food Grade Anhydrous 94-97% Calcium Chloride Pellets
BRINERS CHOICE® Anhydrous Calcium Chloride Pellets
PELADOW® DG Calcium Chloride Briquettes
LIQUIDOW® Food Grade Calcium Chloride Solution
Yes. DOWFLAKE® Xtra 83-87% Calcium Chloride Flake is approved by the EPA as an inert ingredient for pesticide formulations (Reference: 40CFR 180).
Approved uses include:
- Stabilizer in pesticide formulations applied to growing crops or to raw agricultural commodities after harvest.
- Stabilizer in pesticide formulations applied to animals.
- Non-food use pesticide product formulations.
- Antimicrobial pesticide formulations applied to dairy processing equipment and food processing equipment and utensils.
- Pesticide formulations for food processing equipment and utensils when the end-use concentration of the trade name product does not exceed 19.5 ppm.
OxyChem is committed to comply with REACH, the EU regulatory system for chemicals management to protect the environment and preserve the future of the chemicals industry in Europe. OxyChem’s calcium chloride products are registered under REACH. OxyChem’s European Safety Data Sheets will reflect the registration numbers and exposure data required by REACH.
Please Contact Us for additional information.